Adjustable All-Leather Half-check dog collars

Price range: £57.50 through £72.50

Good control collars for use in training and walking dogs on a lead or in the show ring.
Please note sizes are the adjustable length of the leather excluding the slip loop.
If unsure which size you need, please check with me first.
Size Guide

Description

Adjustable all-leather half-check dog collars are hand made in 4mm thick British bridle leathers and fitted with solid brass or nickel-plated brass (silver) rings, a solid cast roller buckle and leather slip loop instead of a chain. These collars can be used on all dogs for training and everyday use where a bit of extra control is needed. They’re also good for dogs who are prone to slipping out of their collars!
Half-choke collars are only handmade to order and available in choice of sizes, thicknesses and colours.  They are available in opening and non-opening buckle versions.
The narrow widths are perfect for the show ring and for everyday use on smaller dogs.
Please note, these collars should ideally be used under supervision and not left on the dog when off the lead – they can fall off over the head or get caught and cause an injury. 

Sizing:
The sizes given are for the length of the leather, not including the slip loop – this adds a maximum of 8″ (20cm) extra when fully open and has a sliding keeper to adjust the amount of loop you need and keep the collar snug around the neck..
Take care when ordering as the non-opening version, although adjustable, has to be fitted by passing over your dog’s head, so you will then need to check that the total length of the leather + slip loop will fit comfortably over your dog’s head and ears.
For both versions, you will usually need the length of the leather to measure a good 2″ (5cm) or 3″ (7.5cm) less than the dog’s neck measurement (narrowest part at top of neck) for a good effective fit, but you could use a length of string or cord to try this out before you order.
Please note, this guidance is for normal use with a lead attached so if you intend leaving the collar on all of the time (not advisable!), you may need a smaller size.
Some breeds with large heads need to have the opening buckle style to achieve the correct fit, so the collar can be fitted by opening the buckle fastening and fitting around the dog’s neck rather than passing the collar over the head.

Choose the width & size to suit the size and type of dog, for example, if your dog’s neck measures 12″ (30cm), you probably need to order an 8″ -12″ size in one of the narrower widths with a lightweight chain. The leather should then be adjusted to approximately 10″ length so you will use some of the chain to make up the circle and give control.

Please care for your leather collar by using a good Leathercare product. The chain and buckle can be carefully cleaned with a brass/metal cleaner.

Please note, these collars are made to order only so check with me if you are unsure of the size required. 

Additional information

Width

1/2″ (12mm), 5/8″ (16mm), 3/4″ (20mm), 1″ (25mm), 1 1/4″ (32mm)

Adjustable Size (Inches) excl. loop

8-12, 10-14, 12-16, 14-18, 16-20, 18-22, 20-24, 22-26, 24-28

Adjustment Type

Opening Buckle Adjustment, Non-opening Buckle Adjustment

Colour

Black, Chestnut, Dark Green, Dark Havana, Hazel, Navy

Metal Fitting

Brass, Nickel

Reviews

There are no reviews yet.

Be the first to review “Adjustable All-Leather Half-check dog collars”

Your email address will not be published. Required fields are marked *

You may also like…