All-Leather Half-Check Sighthound collars

Price range: £52.50 through £60.50

A strong leather half-check collar with solid brass or nickel-plated brass (silver) rings and leather slip loop, for sight-hounds or any dog with a long slender neck. Please note length is for the collar part only! If unsure which size you need, please check with me first.
Size Guide

Description

All-leather half-check sighthound collars are handmade with solid brass or nickel-plated brass (silver) rings and a leather slip loop to tighten the collar. They are ideal for sight-hounds or any dog with a long slender neck. This is a good control collar when used on the lead, while the wider leather section supports the neck and prevents your hound giving you the slip! These collars are often also called ‘martingales’ – relating back to the equestrian control equipment. This version is available in 3 widths and does not have a padded lining. They are available in a range of colours, but made to order only so delivery time may be a little longer.

Sizing:
These collars are available in 3 widths: – 32mm (1 1/4″), 45mm (1 3/4″) and 62mm (2 1/2″). The leather slip loop is 16mm (5/8″) wide and when closed measures 25cm (10″) from the rings on the collar to the end ring where your lead attaches.
To ensure a good fit and adequate control, measure the dog’s neck circumference where the collar will sit – usually the top of the neck, behind the ears at it’s narrowest part, then subtract 2″ (5cm) and this will give the length of the leather that you need to order. The leather slip loop adds a maximum of 20cm (8″) to the collar length when fully open and has a sliding keeper to adjust the amount of loop you need and keep the collar snug around the neck.
So for example, for a 14″ neck measurement you will probably need a 12″ length collar – it just depends how much control you need! Just make sure the full open measurement will fit over your dog’s head & ears comfortably – test with a measured length of cord!

As with all half-check and slip collars, it is not advised to leave these collars on your dog when it’s unsupervised as they can lead to accidents or simply fall off and get lost or chewed!

Please note, these collars are made to order only so check with me if you are unsure of the size required. 

Please take care of your collar from new with a good Leathercare product – it will supple up the leather and keep it in great condition for years of use.

Additional information

Width

1 1/4″ (32mm), 1 3/4" (45mm), 2 1/2" (62mm)

Length

8 inches (20cm), 9 inches (22.5cm), 10 inches (25cm), 11 inches (27.5cm), 12 inches (30.5cm), 13 inches (33cm), 14 inches (35.5cm), 15 inches (38cm), 16 inches (40.5cm), 17 inches (43cm), 18 inches (45.5cm), 19 inches (48cm), 20 inches (50.5cm)

Colour

Black, Chestnut, Dark Green, Dark Havana, Hazel, Navy

Metal

Brass, Nickel

Reviews

There are no reviews yet.

Be the first to review “All-Leather Half-Check Sighthound collars”

Your email address will not be published. Required fields are marked *

You may also like…